Volume 10 | Issue 1 |

 Abstract

In the context of India, Ashmari (urolithiasis) is prevalent, with an expectancy of 12% in a total population reported to be prone to urinary stones. Of this 12%, 50% of the population are severely affected by renal damage, which even leads to a loss of kidneys. However, due to variations in socio-economic status and geographic locations, the prevalence and incidence have changed in different regions over the years. Dietary habits (westernized dietary habits and less fluid intake), as well as climatic factors (hot temperature and many hours of exposure to sunshine) play a crucial role in the development of stones. Other diseases, especially metabolic syndrome, may also contribute to urinary tract stones.Detailed description of Ashmari is the specific contribution of AcharyaSushruta and he included it in the "Eight Mahagada". It may be owing to its potentiality to disturb the anatomy and physiology of urinary system. Total 30 patients with classical signs and symptoms with confirmed diagnosis by USG of KUB were treated in two divided groups for 60 days. 15 patients were treated with TiladiKshara, 250mg 1 capsule twice daily orally, 15 patients were treated with SwadanstradiKwath, 24 ml twice daily orally After completion of trial for 60 days, it was observed that TiladiKsharahas provided highly significant relief in pain in abdomen, burning micturition, hematuria, dysuria, frequency micturition whereas SwadanstradiKwathhas provided highly significant relief in pain in abdomen, burning micturition, hematuria, dysuria, frequency micturition. After careful observation it can be concluded that TiladiKsharapossesses the properties to disintegration and expulsion of stone and can produce better relief in signs and symptoms of Ashmari than SwadanstradiKwath.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Mutrashmari, TiladiKshara, Swadanstradikwath, lithotriptic, diuretic ,alkalizer

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Index terms: Women, Menopause, Health, Biomedicine, Feminist. Socio-cultural, Women-centric

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This paper summarizes the ongoing researches approximately Use of RHA as mineral filler in h bituminous concrete . Many researches regarding the addition of filler have been laid down with the aid of special students. Many research concerning the addition of OPC and waste substances like cement kiln dust,lime and rice husk ash have been studied and then their results have been additionally analyzed and laid all the way down to a proper end. It turned into concluded that through use of different types of fillers increase the existence of pavement, expanded marshal balance values, decreased pavement deformation, growth fatigue resistance, provide better adhesion among asphalt and aggregates and growth in sturdiness of bendy pavement. In this look at, it was investigated to apply of the RHA inside the bituminous concrete as mineral filler in vicinity of conventional filler.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Rice husk ash, lime, marshal stability test, stability value and flow Characteristics, flexible pavement, hot mix asphalts

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Electrocardiography signals (ECG), Fractal dimension, Heart rate time series, Cardiac disease.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

PURPOSE: The aim of the paper is to study and evaluate the performance of share price of IRCTC since its listing on NSE, India. The paper also focuses on studying the pre and post performance in share prices with respect to the lockdown announcement in India. METHODOLOGY: The Research Design is descriptive in nature. Data are collected for the daily share prices of IRCTC, from 14th October 2019 to 15th January 2021, on NSE, India. Descriptive statistics and one variable analysis were carried out to study the prices. Pre and post performance of prices was studied using t test and Kolmogorov-Smirnov Test. FINDINGS: Backed by strong fundamentals, IRCTC Share witnessed huge appreciation at the time of listing on NSE. Also the rally continued on the basis of positive sentiment among the investors. With the rise in global pandemic scenario, the government of India, announced lockdown which brought the entire nation to a standstill, along with the railways. The study inferred that the IRCTC share prices started the downfall one month prior to the announcement of lockdown in the country, and it remained so until the date of commencement of lockdown. The post lock down period, witnessed a V shaped recovery in the IRCTC share prices, and it managed to regain it position.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

IRCTC, LOCKDOWN, NSE

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

ABSTRACT A cement-based foundation (CTB) is a common term that works in a close-knit mix of traditional manufactured soils with a limited amount of portland cement and water after solidification and curing to form a solid, durable, frost-resistant coating. Other definitions such as ground cement foundation, composite cement mortar, solid concrete bed cement, and solid cement foundation are sometimes used. In India, due to the large number of infrastructure projects taking place in rural and urban areas it has resulted in a shortage of building materials. The road industry is looking at ways to improve low-quality materials that are easily accessible for use in road construction. Cement / lime treatment has become an acceptable way to increase soil strength and consistency with moderate proportions, to reduce the number of compounds. The Indian roads congress (IRC) has developed a special edition for the mixed construction of the foundation / ground floor. There is no walkway design guide currently available under the cement-based foundation. To overcome this problem, the aim of the current research project is to construct a walkway design chart using cement and a small solid lime foundation on rural and urban roads with simple and medium traffic (up to 40-60 MSA). It not only saves money but also helps to increase the life cycle of roads.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

ement-based foundation,portland cement,bituminous,frost-resistant

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

TEJENDRA SHARMA KI KAHANIYA MEIN DAMPATY JIVAN KE VIVIDH RANG

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

TEJENDRA SHARMA KI KAHANIYA MEIN DAMPATY JIVAN KE VIVIDH RANG

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This review paper collates and compiles the available published literature on usage of two by-products of steel industry- Ground Granular Blast Furnace Slag (GGBFS) and Ground Granulated Blast Furnace Slag Sand (GGBFSS) in concrete production. Replacement of binder material, fine aggregate and coarse aggregates in concrete making partially or fully is well established and leads to the sustainable development and reduces the material cost. GGBFS and GGBFSS bears similar properties as that of cement and natural fine aggregate/M-sand respectively. Replacement of cement with alternative binding materials reduces the carbon foot-print. Substitution of conventional materials of concrete with GGBFS and GGBFSS at different replacement levels enhances the mechanical strength, workability and durability of concrete.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

GGBFS, GBFSS, workability, Mechanical strength, Durability, Sustainability

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Temperature prediction is an attempt to forecast the temperature of a particular region at a particular time. Temperature prediction is very important as it helps to plan various activities. A prime example of its application is in the field of agriculture. Knowing the range of temperature on a particular day can help a farmer prepare for the next day in advance and plan his activities to obtain optimal output. Temperature forecasts are required by utility companies because they help in estimating demand [1]. An example would be in helping people decide the clothes they should wear on a particular day and hence predict the upcoming demand. If a person expects a sudden drop in temperature, he/she can dress accordingly. On top of that, it helps in various aerial activities such as planning flights and optimizing air traffic. It can be applied to several other areas of interest including marine and military applications. Hence it becomes an essential part of our daily lives. This paper uses four different Machine Learning algorithms - Linear regression, KNN, RandomForest, Neural network - to predict temperatures at a particular time. Proposed algorithms are evaluated using standard evaluation metrics. The results of all the algorithms are analysed and the paper also discusses the performance of the proposed algorithm. The goal of this paper is to accurately predict the temperature in a particular region at a particular time, given the temperature history of that region over the past few days.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

KNN (K-Nearest Neighbors), MLP (Multi-layer Perceptron), Linear Regression, RandomForest, DateTime, R2 Score.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Background: Filipinos aspire to provide a better livelihood for their families by working abroad in various occupations such as nursing, accountancy, engineering, etc. However, one aspect of working that may not be common to Filipinos in Qatar is work-shifting. Work-shifting is not a common topic discussed in the contemporary period. Thus, this phenomenological study describes the lived experiences of work-shifters and how they coped with the problems they experienced in different working shifts. Methods. This qualitative research utilized a phenomenological research design to understand the participants' lived experiences. Also, to know how they cope with the problems they experienced at work and in life related to the central question, "How do Filipino work-shifters identify their stress and coping mechanisms to reach self-actualization?" The researchers collected data through a semi-structured one-on-one interview that consisted of 25 developmental questions and was analyzed using thematic analysis. Findings. The information gathered have identified the stress and coping mechanism of work-shifters, namely: (1) Work Experiences include administration, challenges, and profession; (2) Work Strategies encompass workload, associate, and adaptation; (3) Career Growth involves sacrifices, training, and opportunities; (4) Emotional Solace highlights family, colleagues, and workplace. Conclusions. Work-shifting can be stressful, and they tend to use their emotional solace to relieve emotional stress and develop ways to lessen their work stress Recommendation. The study suggests that future researchers expand the pool of participants to elicit a broader range of responses about work-shifting to fill the literature gap.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Work-Shifters, Coping Mechanisms, Stress Management, Adjustments, Work-shifting, Filipinos, Qatar, OFWs

  License

Creative Commons Attribution 4.0 and The Open Definition