Volume 12 | Issue 12 |

 Abstract

This study addresses the excessive energy consumption due to unattended lights and appliances which contributes significantly to resource depletion and environmental degradation. To address these challenges, this research focuses on developing and energy-efficient and basic whistle and motion activated automatic light with visitor counter device. This device operates when it senses that some person has entered the room and has whistled which turns on the light and automatically turns off the light when no one is in the room. This system provides us with hands-free switching of electronic and electrical appliances.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Automatic Light, Automation, Voice-controlled, Motion detection

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

3D printing known formally as Additive Manufacturing began in the late 1980s. It is a digital manufacturing process that creates 3D objects by fusing or depositing material such as variety of polymers, metals, and ceramics in successive layers laid down under computer control. This objects can be of almost any shape or geometry & are produced from a 3D model as defined in a Computer- aided design(CAD). A variety of 3D printing technologies have been developed to fabricate novel solid dosage forms which are among the most renowned & distinct products today. The present review focused on briefing various techniques, applications in Pharmaceutical technology.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Keywords: 3D Printing Technology, Polypill concept, Thermal-Inkjet Printing, Binder Deposition, Stereo lithography, Democratization.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Minimizing waste while boosting feed through the reusing of food scraps is a significant procedure in advancing manageability inside food frameworks. This approach tends to ecological worries as well as upgrades asset productivity and supports food security. Here is an outline of compelling techniques and practices for reusing food scraps into creature feed and other valuable purposes. Food squander creation has expanded because of the rising populace and interest in good food. The vast majority overall expendable food they don't eat, however discarding food can hurt the climate, causing serious ecological and financial effects. One method for decreasing this misfortune is to change over extra food into practical creature feed, which helps the climate as well as makes animal creation less expensive. It assists us with killing waste by providing creatures with another wellspring of protein and reusing disposed of food. Moreover, this approach can likewise add to the roundabout economy by making a shut-circle framework that limits the utilization of regular assets and decreases ecological contamination. At long last, the survey infers that the utilization of food squandering as creature feed can give a practical answer for food squandering the board, food security, protection of assets, lessening ecological effects, and adding to a round economy.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Key words :- Food waste Waste management Drying and pelletizing Nutrient enhancement Greenhouse gas emissions Methane reduction Resource conservation Waste reduction Feed safety regulations Quality assurance in feed production

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

A new idea that is becoming popular is the use of polyherbal formulations as a powerful,safe, and effective alternative to conventional treatment. A key component of traditional herbal medicine is polypharmacy, sometimes referred to as polyherbalism, which is the combination of several medicinal herbs to increase therapeutic efficacy. To achieve the intended therapeutic effects, a single plant cannot contain enough active phytochemical components. Adding different herbs in a certain ratio to polyherbal and herbo-mineral compositions improves their medicinal impact and reduces their toxicity. Traditional medicine makes use of entire plants or plant mixtures rather than isolated plant parts.Several advantages not found in single herb mixtures are produced by the synergistic effects of polyherbalism. In several diseases, polyhedral formulations exhibit good therapeutic efficacy at safe, high doses.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Polyherbal formulation, Ayurvedic herbs, Herbs with interaction.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Percision medicine and Personalized therapy are really fascinating areas of healthcare . They focus on tailoring medical treatments to individual patients based on their unique genetic make up and lifestyle and other factors by analyzing a persons genetic information ,doctor can identify specific genetic variations that may impact their response to certain medications . This allows for more targeted and effective treatment .Especially for rare diseases or condition that may not have had many treatment options in the past . It is an exciting field that has the potential to revolutionize healthcare . It works on 4p priciple ? Predictive ? Preventive ? Personalized ? Participative Archibald Edward Garrod he is the father of precisison medicine and personalized therapy and also called as father of human genetics . He is english physician. He consider disease is an agent of evolution . He conclude that one drug dose not show same action on 2 different genes or on 2 different persons. He concluded this in his book "inborn errors of metabolism" .

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Precision medicine , Personalized therapy , Tailoring , Genetic makeup, Rare diseases , Genetic variations ,Persons genetic information

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Recently, electric vehicles (EVs) have shown that they can greatly reduce pollution and are a great way to use green energy sources (RESs) instead of fossil fuels. The growing number of electric vehicles (EVs) on the road has made it more popular to use them for other tasks. In power grids. Wind energy has been used as an example of a renewable energy source (RES), taking into account its random nature and the fact that it changes continuously with wind speed. Additionally, the superconducting magnetic energy storage system (SMES) device is picked due to its promising long-life operation. The proposed study looks at different points of point of common coupling (PCC) voltage changes, reactive power support, levelling active power during the on-peak time, and power losses. Moreover, fuzzy logic controller (FLC) systems have been suggested for controlling EVs and the SMES device. The energy management between the installed EVs, SMES, wind, and utility grid side is achieved through the coordination of the FLC devices. The results show that reduced peak and mean values of total power losses and line active power are achieved by the proposed coordination method. Moreover, improved profiles of the PCC voltage, reactive power support, and active power levelling, and sustainable and reliable power supply are achieved by the proposed method for wide operating ranges and modes of operation.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Electric vehicles (EVs), energy management, fuzzy logic controller (FLC), renewable energy, superconducting magnetic energy storage (SMES), wind energy.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Mutual Funds were introduced in the Indian financial system with a view to provide comparatively safer investment at the doorstep of the common investors. In this study researcher has tried to understand the performance of selected large cap mutual funds in India. For the study purpose 4 large cap mutual funds has been selected. The Secondary data has been considered for the performance analysis and it was achieved by using various tools and techniques like standard deviation, beta, Sharpe ratio, and Treynor ratio. The findings depict that SBI Blue-chip Regular Growth, ICICI Prudential Blue-chip Fund Growth, Aditya Birla Sun Life Frontline Equity Fund Growth, HDFC Top 100 Fund Growth showed highest return among the selected funds.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Mutual Funds, Performance Evaluation, Standard Deviation, Sharpe Ratio, Treynor Ratio, Beta, Large Cap Funds

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

?? ?????? ???? ???? ?? ??????? ????????? ??? ?????? ?? ?????? ???????? ???? ??, ?????? ?????? ?? ????????? ????? ??? ?????? ?? ???? ????? ??? ??? ???? ????????? ?? ????? ?? ?? ??? ?????? ???? ????? ?? ????? ?????, ?????? ????? ?? ??????????? ???? ?? ???????-?????? ????????? ?? ??? ???? ??? ?????????? ?????? ?????? ??? ???????, ???? ???? ?? ??????? ????????? ??? ?????? ?? ???? ?? ???????? ??, ????? ????????? ?? ?????? ????????? ?? ???????? ??, ?? ??????? ???????????? ?? ???? ???????? ???? ??? ??? ??? ?????? ?? ?????? ?????? ?? ???? ????? ?? ?????? ???? ??? ??, ?????? ?? ????? ??? ?? ?? ?????? ?? ????? ????? ?? ??????? ???????? ?? ?????????, ?????? ?? ?? ??? ?????? ?? ???? ??? ???? ?????, ??????? ???????? ?? ???, ????????? ?? ???? ??????, ?? ????? ???? ????????? ??????? ?????? ?? ????? ???? ???? ?????? ??????? ??? ?????????-???? ???????? ?? ?????? ????, ??????? ?????? ?? ?????? ???? ??? ?????? ????, ?? ?????? ?????? ?? ?????? ?? ??? ?????????? ????????? ??????????? ?? ????? ???? ????? ??? ??????? ?? ?????? ?? ????? ??? ???? ??? ??, ???? ??????? ???????????? ??? ????????? ???????? ?? ??? ?????????? ???? ??? ??? ?????? ???????? ??????? ?? ?? ?????? ????????? ?? ?????? ??? ????? ??????? ????? ?? ?????? ?????? ?? ????? ??? ???? ??? ?? ???? ??? ?? ??? ? ??? ????????? ?? ??? ?? ???? ???? ?????? ?? ???? ???? ?? ??????? ????????? ??? ?????? ????? ?? ?????????? ???? ????? ??? ??? ????????? ?? ???????? ?????? ???

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

??????? ??????, ?????? ?????, ???? ?????, ???? ????, ??????? ???????, ?????? ?????????, ????????

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This project proposes the principal of implementation of ultrasonic distance detector using Arduino. In this process distance will be measured using an ultrasonic sensor. This is widely used for non contact distance measurements across various fields such as robotics, industrial automations and automotive systems. These sensors functions by emitting ultrasonic sound wave and calculating the time Taken for the echo to return after reflecting off an object. This paper delves into the fundamental principles of ultrasonic sensing focusing on the time-of-flight method to calculate distances.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Ultrasonic Sensor, Distance Measurement, Obstacle Detection, Echo Signal Processing, Sound Wave Technology, Non-Contact Measurement, Ultrasonic Transducer, Time of Flight, Range Finder Technology, Real-Time sensing, Environment Monitoring, Automatic Systems, Robotics Navigations, IOT Applications, Ultrasonic Waves.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Social distancing has become a critical public health strategy during pandemics like COVID-19. This study proposes integrating social distancing measures into ID card systems to enhance compliance and safety. By embedding proximity sensors and leveraging real-time data analytics, these systems can monitor individual proximity, provide alerts when safe distances are breached, and identify high-risk areas. Additionally, they can support contact tracing efforts, helping to limit disease spread. The implementation focuses on workplaces, educational institutions, and public spaces, aiming to assess the system's feasibility in promoting safer environments. Key considerations include data privacy, user acceptance, and compatibility with existing infrastructures. This project also aims to develop a prototype to demonstrate the effectiveness of this innovative approach in reducing transmission risks and supporting public health efforts.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

IOT, LED, ARDUINO IDE , ULTRASONIC SENSOR

  License

Creative Commons Attribution 4.0 and The Open Definition