Volume 6 | Issue 2 |

 Abstract

The technology of e-metering (Electronic Metering) has gone through rapid technological advancements and there is increased demand for a reliable and efficient Automatic Meter Reading (AMR) system. Electricity is one of the fundamental necessities of human beings, which is commonly used for domestic, industrial and agricultural purposes. This report presents the design of a simple low cost wireless GSM energy meter for automating billing and managing the collected data globally. The proposed system replaces traditional meter reading methods and enables remote access of existing energy meter by the energy provider. A GSM based wireless communication module is integrated with electronic energy meter of each entity to have remote access over the usage of electricity. A PC with a GSM receiver at the other end, which contains the database acts as the billing point. Also, the energy provider can monitor the meter readings regularly without the person visiting each house by sending the information of the energy consumed to the user via SMS, and to the controlling Base station.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

GSM, Energy Meter, Microcontroller, Load

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Association rule

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Distinctive routing systems designed for wireless network are application agnostic, to overcome this we consider a wireless network where the application flows consists of video traffic. Implementation of resistant distortion in video streaming is very typical by user, Video streaming in MANETs is most Challenging issue and it mainly affected by factors like node mobility, dynamic change in topology, multi path shadowing and fading, collusion, interference and many more. The dynamic change in topology causes periodic connectivity which results in large packet loss. Video streaming in real time requires special techniques that can overcome the losses of packets. To account for the evolution of the video frame loss process, we construct an analytical framework to, first, understand and, second, assess the impact of the wireless network on video distortion. The framework allows us to formulate a routing policy for minimizing distortion, based on which we design a protocol for routing video traffic. Here in this paper we have studied and reviewed many issues and different techniques present for video streaming over MANETs. This paper contain work done in the field of video streaming in MANETs and guide newcomers who are willing to work in video streaming in MANETs.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Wireless network, Protocol, Distortion, Routing, Analytical Framework, video distortion minimization, MDC, Multipath routing

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

HPTLC, Pharmacogonosy, Shwasahara Dashemani Churna, pharmaceutical, Tamaka Shwasa.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

communicative abilities, competence, productive skills, proficiency and vocabulary.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Global Positioning System (GPS) is becoming widely used for tracking and monitoring vehicles. The system has been use for tracking College Bus in real time using GPRS (General Packet Radio Service) technology. The systems provide the possibility of tracking the location of vehicles at an affordable cost. A vehicle tracking system can be enables the fleet operator to find out the location of the vehicle throughout the journey of the College Bus. The system has provided GPS-GPRS based College Bus tracking system. The current position of the vehicle has been acquire by GPS device which is integrating into the target vehicle and the location coordinates can sent through GPRS, it provide by the GSM network. The GPS receiver is used to give latitude and longitude of the current location. The proposed system can be built using the microcontroller Atmeg328P-AU. This is the heart of the system. The GPS receiver connecting to microcontroller through the serial port and used to obtain the current location. The GPS receiver acquires the current position of the location and this information of College Bus Publish to CloudMqtt server on a specific Topic using GPRS Module. GPRS provide TCP/IP connection with CloudMqtt server. ClousMqtt server receives College Bus location information via network and stores this information in database. This information is available to authorized users who Subscribe the Topic like Node-Red Web App and Android Mobile

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

1. Electro SIMduino UNO+SIM808 Module 2. GPS Antenna 3. GSM Antenna 4. DC Battery/+5v Adapter 5. Arduino UNO Case

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

automatic lawn mower used to cut the grass at particular height and change the path if any object is front of it.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

-

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The main aim of this project is to implement real time women security system in public places which aims to provide the 100% safe environment .This project focuses on a security system that is designed solely to serve the purpose of providing security and safety to women so that they never feel helpless while facing such social challenges. This project describes about a smart intelligent security system for women.The system incorpo. rated with sos switch as an input which when pressed shows the result screaming alarams and activates the electric shock device which are imposed for self-defending purpose and send geographic location and messages to the two emergency contacts.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

GSM ,GPS , PIC 16F877A

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Parthenium Weeds, Partheniumhysterophorus, Rhizopus oryzae, Biological Control

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The heat generated in CVT during high load conditions is huge and leads to high thermal loads. Particularly, rubber belt suffers from high temperature peaks and their life span reduces significantly. Thus, expansion of belt due to heating results in loss of transmission efficiency and less durability of CVT parts. Thermal analysis had been carried out in the earlier researches which calculate the temperature of the belt and the pulley. During running condition, CVT temperature may exceed 150 ?C which then reduces lifespan of the rubber belt. Thus, sufficient cooling must be provided to CVT. Being a delicate task for open CVT system, it becomes even worse for enclosed CVT system. But enclosing of CVT is required in order to protect the system from dust, mud and water to avoid belt slipping. Computational fluid dynamics (CFD) approach is used to analyze the temperature distribution of pulley and belt. The problem is being solved using steady-state method since transient approach is not feasible. Transient simulation increases the computational time as well as cost. In our work, our focus is on increasing the life span of belt by maintaining the belt temperature at or below 150 ?C. Proper analysis were carried out to study the flow behavior of the air inside of CVT casing. Thus our aim is to design a closed CVT casing to increase the flowrate of air for cooling the belt as well as pulleys.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

CVT; Thermal Analysis; StarCCM+; Al MMC; Fluoroinert

  License

Creative Commons Attribution 4.0 and The Open Definition